高真空多层绝热结构中一氧化钯吸氢特性研究

对高真空下的一氧化钯吸附氢气的特性进行了分析和研究,实验测定了一氧化钯吸附氢气的机理,不同条件下一氧化钯对氢气的吸附特性,以及设置一氧化钯对夹层漏放气的影响。实验证明,在夹层中使用恰当的混合吸附剂,可以有效减小夹层的漏放气量,提高低温储罐的寿命。     

Study for dual-function EUV multilayer mirror

Studying the distribution of He⁺ in Earth's plasmasphere by detecting its resonantly scattered emission at 304 Å will record the structure and dynamics of the cold plasma in Earth's plasmasphere on a global scale. EUV imaging systems usually utilizes near-normal incidence optics including multilayer mirror and filter. In this paper, the space condition of the Earth's plasmasphere to confirm the expected performance of mirror were analyzed. In order to achieve higher response at 304 Å and reduce 584 Å radiation for the optical system, a new multilayer coating of Mo/Si with UO₂ was developed. Based on optical constants of Mo, Si and UO₂, we used a simplest method to compute the reflectance of this new multilayer mirror range from 100 to 584 Å. The results show the desirable thickness of UO₂ is 17 Å, and the multilayer mirror has a high reflectance of 26.10% at 304 Å and a low reflectance of 0.52% at 584 Å.     

微粗糙基底上多层涂层光散射偏振建模与特性研究

为满足多层涂层目标的偏振探测需求,基于一阶矢量扰动理论,结合偏振传输矩阵,建立微粗糙基底上多层涂层的光散射偏振双向反射分布函数模型,研究多因素影响下两种典型涂层目标,单层减反射涂层和多层高反射涂层的光散射偏振特性,结果表明单层减反射涂层目标的偏振度受观测位置影响,峰值左侧的偏振度较之裸基底增大,右侧反之,探测不同观测角下的偏振度可区分无涂层和涂层目标。不同观测角和入射波长下,多层高反射涂层目标的偏振度与涂层层数和涂层光学厚度显著相关,层数增加,多层涂层在镜反射附近具有去偏作用。仿真结果符合测量数据,验证了多涂层目标散射偏振模型的正确性与合理性,为实现多涂层目标偏振探测和反射隐身技术提供理论依据。     

月基极紫外相机多层膜反射镜

月基极紫外相机用于月球表面对地球等离子体层辐射出的30.4 nm谱线进行成像观测,多层膜反射镜是月基极紫外相机的重要光学元件。根据月基极紫外相机技术参数,选择了B₄C/Mg,B₄C/Mg₂Si,B₄C/Al,B₄C/Si,Mo/Si等材料,对其周期厚度、材料比例、周期数等参数进行优化。计算了以上材料组合在30.4 nm的反射率曲线。考虑到月球环境的特殊性和材料的物理化学性质,从中选择出Mo/Si和B₄C/Si两种组合,利用磁控溅射进行镀制。Mo/Si和B₄C/Si多层膜在30.4 nm反射率分别达到15.3%和22.8%。     

Rheology and morphology of multilayer reactive polymers: effect of interfacial area in interdiffusion/reaction phenomena

The rheological behavior of multilayered reactive polymers was investigated. Dynamic mechanical experiments were performed to probe the effect of the interfacial area on the rheological behavior of a multilayered structure as compared to that of a droplet-type morphology. Polyamide (PA6)/polyethylene grafted with glycidyl methacrylate was used as a model system, and in the molten state, such a system generated a reaction between amine, carboxylic, and epoxy groups. Multilayer structures containing various amounts of both interfacial area and volume fractions of the two components were studied. Relationships between viscoelastic material functions and compositions were used to analyze the effects of bulk and reactive functions in the polyolefin phase at the interface with PA. The contribution of the interface/interphase effect was investigated along with the increase in the number of layers, and the results showed that the variation in dynamic modulus of the multilayer system was a result of both diffusion and chemical reaction. Specific experiments were carried out to separate the thermodynamic effects from the kinetic ones, and the results were rationalized by comparing the obtained data with theoretical models. Finally, the effect of the interface/interphase triggered between the neighboring layers was quantified at a specific welding time and shear rate.     

由聚电解质自组装多层膜制备微孔薄膜

带有相反电荷的聚电解质通过静电作用交替沉积可以得到自组装多层膜,由于这种技术可操作性强,用途广泛,近十几年来已有了大量的研究．聚电解质多层膜在一定条件下可以形成纳米孔和微米孔．Fu等研究了聚丙烯酸和聚乙烯基吡啶组成的氢键自组装多层膜在碱溶液中溶去其中的聚丙烯酸后,剩下的聚乙烯基吡啶重构形成微孔薄膜．Mendelsohn等发现将聚丙烯酸和聚烯丙基胺自组装而成的多层膜浸入pH=2．4左右的溶液中可制备微孔薄膜．但这些方法并不能使强聚电解质多层膜形成多孔结构。     

Evaluation of multilayer film stability by Raman spectroscopy after gamma-irradiation sterilization process

Polymers such as polyethylene (PE) and ethylene vinyl alcohol (EVOH) are primary constituents of single use plastic systems in the biopharmaceutical and biotechnology industries. These devices are sterilized by gamma-irradiation prior to be used, the usual dose being between 25 and 45 kGy. Optical spectroscopies are of great interest for chemical analysis and are used to obtain information on the composition of materials such as polymers. Raman spectroscopy provides information on the fundamental vibrations of molecules, using excitation in the visible wavelength range. The purpose of this study is to unveil the impact of gamma-sterilization on polymers in industry-like experimental conditions. Cross-sections of films are analyzed before and after sterilization using different radiation doses: their compositions and chemical evolution of the material are examined using micro-Raman spectroscopy. As the chemical composition of the layers is complex, due to the presence of additive compounds, there is considerable overlap between the spectral data. In this case, the use of spectral curve resolution chemometric methods is unique for unravelling the complex identification of the layers and to study the degree of chemical modifications.